Table Of Contents

Change History

Installing the RP-D10 Printer Driver

The current version as of 2017-10-13 of the Windows Driver is included in the Links section below and latest file versions can be downloaded from the Seiko website (http://www.sii.co.jp/en/).  The printer should be attached to the computer and powered on prior to installing the Windows Driver.

USB Interface

Installing RP Series Communication Software

The current version as of 2017-10-13 of RP Series Communication Software is included in the Links section below and the latest versions can be downloaded from the Seiko website (http://www.sii.co.jp/en/).

1. Double-click Installation package to start the installer (The SII RP Communication Software screen appears).
2. Select Next (The License Agreement screen appears).
3. Accept the license agreement.
4. Select Next (The Install Completed screen appears).
5. Select Finish (The Installation is closed and a RP Communication Setting Utility shortcut is added to the desktop).

Configuring RP Series Communication Software

1. Start the Communication Settings Utility from the RP Communication Setting Utility desktop shortcut (The Communication Settings Utility screen appears).

2. Connect the printer to the computer by using the USB cable.
3. Select the Virtual Serial Port Driver option.
4. Select Apply (The Current Setting area changes to Virtual Serial Port Driver when the change is successful).
5. Select the iSerialNumber tab.
6. Select Auto (Same as unit serial ID).

7. Select Apply (The USB iSerialNumber changes  and matches the Unit Serial Number value when the change is successful).

   Setting the iSerialNumber value helps ensure the same Port Number is retrieved if the Printer is plugged into a different USB Port.
8. Select Close.

Confirming the Virtual Serial Port Number

1. Open the Run dialog box by pressing and holding the Windows key, then press the R key.
2. Type devmgmt.msc
3. Select OK (The Device Manager window opens).
4. Expand Ports.

5. Locate the SII Virtual Serial Port (COMx) entry. 

   The COMx portion of this value represents the virtual serial port number that is configured for the printer.  This value is needed for the Cash Register Configuration

Bluetooth Interface

Pairing the Printer

1. Open the Run dialog box by pressing and holding the Windows key, then press the R key.
2. Type bthprops.cpl
3. Select OK (The Bluetooth Devices window appears).
4. Power on the Printer.

5. Activate Pairing mode by selecting the Pair button on the back side of the printer for 5 seconds or more.

   The printer is in pairing mode when the pairing indicator flashes.  The printer will remain in pairing mode for 60 seconds.
   The pairing is conducted by SSP (Simple Secure Pairing), however, a PIN code is used when the host device does not support SSP. The default PIN code is "0000".

Confirming the Bluetooth Serial Port Number

1. Open the Run dialog box by pressing and holding the Windows key, then press the R key.
2. Type Control Panel
3. Select OK (The Control Panel opens).
4. Select Device and Printers (The Device and Printers window opens).
5. Locate and Right-Click on the RP-D10 printer entry.
6. Select Properties from the Menu (The RP-D10 Properties windows appears).
7. Select the Services Tab.

8. Locate the Serial port (SPP) 'Serial'  COMx entry. 

   The COMx portion of this value represents the bluetooth serial port number that is configured for the printer.  This value is needed for the Cash Register Configuration

Cash Register Configuration

Receipt Printer

1. From the Enterprise Tab of TallyExplorer, select the Register to configure.
2. Select the Register Properties Link (The Modify Register screen opens to the General tab).

3. Within the Receipt Settings section, set the following values:

   Field	Description	Value
   Interface Type	The Interface type of the receipt printer	Serial
   Interface Options	The Interface Options of the receipt printer	COMx,9600,N,8,1 x refers to the port number assigned to the printer.
   Driver Code	Indicates the Printer driver to use when connecting to the printer	SII RP-D10
   Line Delay	The Line Delay forces the cash register to add a delay between each line sent to the printer.  Impact/Inkjet printers, generally, should be configured for a Line Delay of 150 while thermal printers should be 0. TallySoft recommends gradually increasing the Line Delay value as needed in order to prevent a negative impact on the printer's performance.	0

4. Select Save.
5. Select Exit.

Cash Drawer

1. From the Enterprise Tab of TallyExplorer, select the Register to configure.
2. Select the Register Properties Link (The Modify Register screen opens to the Devices tab).
3. Select the Devices tab.

4. Within the Cash Drawer section, set the following values:

   Field	Description	Value
   Interface Type	The Interface type of the cash drawer	IND-24V
   Interface Options	The Interface Options of the cash drawer	COMx x refers to the port number assigned to the printer.
   Driver Code	Indicates the Printer driver to use when connecting to the printer	IND24V
   Has Slot	Indicates if the Cash drawer has a slot on the front panel of the drawer.  If Yes, the drawer will only open during cash transactions and expect the slot to be used to insert checks and credit card slips.  If No, the drawer will open for all tender types.
   Starting Amount	The default amount of cash in the drawer when a new register is created

5. Select Save.
6. Select Exit.

Adjusting the Paper Cutter

Based on the location of the printer's paper cutter and the configuration of the Receipt Profile and store's configuration, there are instances when the receipt is not cut/torn in the correct location. 

Down

Edit an Existing Receipt Footer

To adjust the location of the paper cut down, additional lines will need to be added to the end of the Receipt Footer.  An additional Receipt Profile may be created to prevent existing receipt printers from printing erroneously.

Duplicate a Receipt Profile

1. From the Enterprise Tab of TallyExplorer, select the Receipt Profile Button (The Receipt Profile window opens).

2. Expand the tree view and select the Receipt Profile to Duplicate.

3. From the Quick Access Toolbar (QAT), select Duplicate (The selected Receipt Profile is copied).

4. Enter a Profile Name.

5. From the QAT, select Save
   

Create a New Receipt Footer

1. From the Enterprise Tab of TallyExplorer, select the Receipt Profile Button (The Receipt Profile window opens).

2. Expand the tree view and select the Receipt Profile to configure.

3. Select the Receipt Format tab.
4. From within the Receipt Footer section, select the Add button from the drop down of the Receipt Footer of the desired transction type (The Add Receipt Footer screen appears).

5. Enter the Receipt Footer Name.

6. Select the Identifier.

7. Enter the Receipt Text to include blank lines at the end.

   Some printers, including the Seiko RP-D10, truncate blank lines from the end of the receipt.  In this case, each of the additional lines should contain a period (.).  This approach will ensure that the printer advances the paper to the necessary location prior to cutting the paper.

8. Select Save.
9. Select Exit.

Repeat the Create New Receipt Footer process for all desired transaction types.

Configure existing Registers to use new Receipt Profile

1. From the Enterprise Tab of TallyExplorer, select the Register to configure.
2. Select the Register Properties Link (The Modify Register screen opens to the General tab).
3. Update the Register Receipt Profile within the General Settings section.
4. Select Save.
5. Select Exit.

Up

To adjust the location of the paper cut up, TallySoft's printer definition will need to be adjusted.  Please contact Technical Support for assistance.

Links

• RP-D10 Printer Driver v1.40 32bit
• RP-D10 Printer Driver v1.40 64bit
• RP Series Communication Software v1.10a 32bit
• RP Series Communication Software v1.10a 64bit
• RP-D10 Series User's Guide
• RP Series Communication Software User's Guide